1. Homepage
2. About us
3. Basket
4. Contact Us
5.   RSS

2 x Tubes of  E6000 glue  0.18floz (5.32ml) and 2 x Tubes of Quick Hold Craft Glue 0.18floz (5.32ml)

Amazing QuickHOLD® Contact Adhesive & Sealant

Designing and creating crafts with a wide variety of materials is now quick and easy.

• Thin formula.
• Quick Dry.
• Bonds easily with metal, stones, jewels and more.
• Dries clear.
• Safe to use in and around water.
• Paintable.
• Withstands heat up to 150 °F / 66 °C.

• Adhere stones and gems to fashion jewelry.
• Assemble plastic and wood craft kits.
• Affix delicate embellishments to projects.
• Fix cracks in ceramic bowls and pottery.
• And much more!

HOW TO USE

Just follow these step-by-step directions when using Amazing QuickHOLD®:

1. Please read all directions before using. Amazing QuickHOLD should be used in a well-ventilated area.
2. Surface should be clean, dry, and free from dirt.
3. Always test a small area to ensure proper application technique and dry time.
4. Apply Amazing QuickHOLD directly to each surface to be bonded or repaired. Allow Amazing QuickHOLD to harden, 5-10 minutes, before bringing surfaces together.
5. Allow the project to cure for 2-6 hours. Product can be used between 50 °F and 90 °F (10 °C and 32 °C). Dry time decreases when used between 70 °F and 90 °F (21 °C and 32 °C).
6. Water resistant immediately upon application. Resistant to gasoline, alcohol, paint thinner and most solvents.
7. Pain over Amazing QuickHOLD for UV resistance.
8. Keep threads at the neck of the tube free of Amazing QuickHOLD residue.
9. Store unused Amazing QuickHOLD at room temperature with cap tightened.

NOTE: Amazing QuickHOLD may damage finished surfaces. Avoid such contact until Amazing QuickHOLD is completely dry.

FREQUENTLY ASKED QUESTIONS (FAQs)

How long does Amazing QuickHOLD take to dry?
A full cure takes 2 to 6 hours, depending on the surrounding environment. With lower temperatures and higher humidity, cure time increases; with higher temperatures, cure time decreases.

How can Amazing QuickHOLD be cleaned up?
Small amounts of acetone or naphtha may be used on uncured adhesive; the adhesive will ball up and brush off. Cured adhesive may be removed by cutting or scraping.

Is Amazing QuickHOLD water resistant?
Yes. Amazing QuickHOLD is water resistant immediately upon application. Use thin coats of Amazing QuickHOLD to build a thick coating on the surface to be sealed, allowing each layer to set 2 to 6 hours. This is especially ideal for smooth surfaces, such as plastic, glass or ceramic.

What temperature range does Amazing QuickHOLD withstand?
Amazing QuickHOLD is best when applied in temperatures ranging from 70 °F to 90 °F (21 °C to 32 °C). (Note: Amazing QuickHOLD can be applied outside this temperature range, but cure time may increase significantly.) When cured, Amazing GOOP can withstand temperatures between -40 °F and 150 °F (-40 °C to 66 °C).